Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Lynn?
Spring replacement in Lynn typically costs $180 – $340 for a single torsion or extension spring when you call a specialist. Most homes have two springs working together that fail around the same time, so a matched pair usually runs about twice that range. The written estimate sets the final price, and we give that estimate free before any work starts.
That number holds whether we’re replacing a spring on an older door in the Highlands or a newer unit near the Lynnway. What changes it is the spring type, the door’s weight, and whether the cables, rollers or bearings need attention while we’re in there. Garage doors are all we do, so we can look at yours, name the part and the price, and often handle it the same day you notice the problem.
Key Takeaways
- One spring: typically $180 – $340. A matched pair is usually about double, since both springs wear out together.
- Cable, roller and track work is often done at the same time and priced separately.
- Free estimates, with the price fixed per job in writing before we begin.
- Our technicians have up to 14 years of experience with the springs and hardware already common on Lynn doors.
- Call (866) 570-7585. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Spring Replacement Cost Breakdown (2026)
Here’s how the parts and labor break down for the Lynn market in 2026. These are typical estimated ranges, not a quote. A quote depends on the door itself, and we’ll give you one in writing before touching anything.
| Job | Typical Estimated Range | Notes |
|---|---|---|
| Single spring replacement | $180 – $340 | One torsion or extension spring, part and labor |
| Matched pair (both springs) | About twice the single range | Most doors have two; replace together so they wear evenly |
| Cable repair | $130 – $250 | Often done alongside springs when cables show wear |
| Roller replacement | $110 – $220 | Quieter, smoother travel; worth it during a spring job |
| Track realignment | $120 – $240 | If the door shifted or a track bent when the spring let go |
| Panel replacement | $250 – $500 | When impact or a failed spring damaged a section |
| Opener repair | $120 – $320 | If the opener took strain when the door was forced |
| Full spring replacement job (with related repairs) | $150 – $600 | Reflects the total when more than the spring is involved |
The single biggest driver is whether you replace one spring or the pair. Springs are matched at installation and carry the same load through the same cycles, so when one snaps, the other is usually close behind. Replacing only the survivor means a second visit and a second bill not long after. Seizing the chance to swap both, plus any tired cables or rollers, is generally the better value.
Door weight and size matter too. A heavier double-wide door takes higher-rated springs, which cost a bit more. If the breakage bent a track or jammed a panel, that adds to the job. On older doors, we sometimes find the original hardware was mismatched to the door’s weight, and correcting that is part of doing the job right rather than patching it. We price each job on its own and put the total in writing so there are no surprises.
What Affects Spring Replacement Pricing in Lynn
A few things move the number up or down. None of them are mysterious once you know what we’re looking at:
- One spring or two. Most Lynn doors run two springs. A pair costs roughly twice the single-spring range because both parts and both sets of labor are involved. We’ll tell you which setup you have and why replacing both usually makes sense.
- Spring type and rating. Torsion springs (mounted on a bar above the door) and extension springs (running along the sides) are priced differently, and each comes in ratings sized to the door’s weight. A heavier or taller door in a two-car garage takes a sturdier spring than a single-car door.
- What else failed with the spring. When a spring snaps, the door drops hard. That jolt can stretch a cable, crack a roller, bend a track or strain the opener. We check all of it and quote the related work separately so you see exactly what you’re paying for.
- Door age and hardware condition. Older doors in Lynn’s established neighborhoods often have bearings and drums that are past their best. If the assembly needs freshening while it’s open, we note it and price it.
- Access and door height. A standard single door is straightforward. A very tall or unusually heavy door takes more time and heavier-rated parts, which shows up in the estimate.
- Whether the door is safe to leave. A door with a broken spring should not be forced or used. That’s a call-it-now situation, not a wait-and-see. We treat it as urgent and get you booked in fast.
One thing that doesn’t change the price unfairly: the time of day. The estimate is set per job by the written estimate, plain and simple. If you discover a broken spring in the evening, call us. We answer 24/7, and a call outside dispatch hours gets booked into the next opening, Sunday through Friday, 7am to 7pm.
Why Springs Are a Job for a Specialist
A garage door spring holds an enormous amount of tension, and it’s under load even when the door looks still. A torsion spring or a stretched extension spring can release that stored energy suddenly and without warning. This is not a part to adjust, cut or remove without the right tools and training, and it’s one of the most injury-prone jobs on a home. We handle spring replacement as a core specialty rather than an add-on, and our technicians have up to 14 years of experience doing exactly this kind of work. If a spring has broken, leave the door alone and let a trained professional take it from there. We can work with your insurer if the damage extends beyond the spring itself.
How to Save on Spring Replacement
The most reliable way to keep the cost down is to replace the pair together and address worn cables and rollers in the same visit. That avoids a second service trip and the labor that comes with it. A few practical moves:
- Deal with it promptly. A snapped spring left in place keeps straining the cables, the opener and the door itself. Catching it early usually means a cleaner, cheaper repair than waiting until more parts are involved.
- Replace both springs at once. It costs more up front than one spring, but it saves you a second call and a second bill when the other one fails.
- Ask about the related wear. If the rollers are noisy or the cables look frayed, folding that into the spring job is usually less than booking it separately later.
- Get the estimate in writing. Ours is free, and the written estimate sets the final price, so you know what you’re committing to before anything is touched. Call (866) 570-7585 to arrange it.
- Don’t force a broken door. Running the opener on a door with a dead spring strains the opener and can turn a spring job into a spring-and-opener job. If it won’t open, stop and call.
If you’re weighing repair against a larger job, our spring replacement page walks through how the work is done and when a full door replacement makes more sense than repeated repairs.
Repair or Replace: Which Makes Sense?
A broken spring on an otherwise sound door is almost always worth repairing. The door panels, tracks and opener are still good, and a spring job restores full function for a fraction of a new installation. But if the door is old, the panels are dented or rusted through, or the hardware keeps failing in different spots, a replacement can be the better spend. A new door installation in Lynn typically runs $700 – $2200 depending on size, material and style. When we give an estimate, we’ll tell you honestly whether the door has more life in it or whether you’d be throwing money at a worn-out system.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Lynn?
Replacing a single spring in Lynn typically costs $180 – $340. A matched pair, which most doors use, usually runs about twice that because both springs and both sets of labor are involved. Call (866) 570-7585 for an exact quote. Estimates are free.
Do I need to replace both springs at the same time?
Usually yes. Springs are installed as a matched set and carry the same load through the same cycles, so they wear out together. Replacing only the broken one means the other is likely to fail soon after, and you’ll pay for a second visit. Expect a pair to cost about twice the single-spring range. Call (866) 570-7585 and we’ll confirm what your door needs.
Can you come the same day if my spring breaks?
Same-day service is often available, and we treat a broken spring as urgent because the door isn’t safe to use. Call (866) 570-7585. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Is it cheaper to repair or replace a garage door with a broken spring?
Repair is almost always cheaper when the door itself is sound. A spring replacement at $180 – $340 for one spring, or roughly double for a pair, restores full function for far less than a new door at $700 – $2200. Replacement only wins when the panels or hardware are failing elsewhere. Call (866) 570-7585 for a free estimate and an honest read on your door.
What else might I pay for when a spring breaks?
Often the spring isn’t the only casualty. When a spring snaps, the door drops hard and can stretch a cable ($130 – $250), crack a roller ($110 – $220) or bend a track ($120 – $240). We check all of it and quote any related work separately. Call (866) 570-7585 for a free estimate so you know the full picture.
One Call Covers It All
A broken spring is a specialist’s job, and it’s the one we do most. From opener to spring to panel, one call covers the whole system, and we work on the brand already in your garage, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. You get a free estimate, the price set in writing before we start, and a door that works the way it should. To book yours, see Lynn Garage Door Repair Co or pick up the phone.
Call (866) 570-7585 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Lynn market as of 2026. Lynn Garage Door Repair Co offers free estimates – call (866) 570-7585.
Written by the team at Lynn Garage Door Repair Co.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Matt Sullivan"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Paige Walsh"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Dale Whitaker