Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Lynn Homeowners
A garage door that won’t open leaves a car trapped inside. A door that won’t close leaves the house open to weather and to anyone walking past. When that happens, you don’t need a handyman guessing at the problem, you need someone who works on doors and openers every week and can tell you what’s wrong the first time. We’re Lynn Garage Door Repair Co, and garage doors are all we do.
Our technicians have up to 14 years of experience, and they know the brands already bolted to Lynn garages: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That means the diagnosis is brand-specific rather than trial and error. Same-day service is available for most repairs, and we answer 24/7 on (866) 570-7585. Every price is quoted and agreed before any work starts.
What Our Garage Door Repair Service Includes
Most garage door problems fall into one of six buckets. Some are mechanical, some are electrical or electronic, and a few are a mix of both. When you call, we ask what the door is doing and how it sounds, then send a technician who can handle the whole system instead of one part of it.
Panel Replacement
A single dented or cracked panel doesn’t mean a new door. We replace the individual section that’s damaged, matching profile and color where the make allows. You’ll typically call for this after a bumper, a stray basketball, or a backed-into door, and you’ll know it’s time when you can see damage from the street or the panel no longer sits flush with its neighbors. We check the rest of the door while we’re there, because a panel that’s been struck often means a bent hinge or a roller knocked out of its track.

Spring Repair
Torsion and extension springs carry the door’s full weight, and when one lets go, the door becomes too heavy to lift safely by hand. The sound is usually a bang like a firecracker, followed by a door that won’t budge. Spring work is one of the most injury-prone jobs in this trade, so we handle it as a core specialty rather than an add-on: trained hands, the right winding bars, and a matched pair replaced together when one has failed. Please don’t try to lift or wind a broken spring yourself.

Cable Repair
The cables run from the bottom corners of the door up to the drums on the shaft, and they work with the springs to keep the door level. When a cable snaps or slips off a drum, the door often tilts to one side or hangs crooked, and the sound is a hard snap followed by slack. We replace cables in pairs and inspect the drums and bottom brackets at the same time, since a worn drum is often what chewed the cable in the first place. This is another one to leave to a trained technician: the cables are under heavy tension whenever the door is partway down.

Track Realignment
Tracks are the metal rails the rollers travel in, and a bend or a knock out of plumb sends the door scraping, sticking, or jamming halfway. You’ll hear a grinding or popping sound as the door moves, and you may see a visible kink in the rail. We straighten and re-anchor the track, then check that both sides are parallel and level, because a track that’s been nudged usually takes a bracket or two with it.
Roller Replacement
Rollers are the small wheels inside the track, and when they wear out, the door gets loud. A door that rattles, shudders, or squeals on the way up usually has a flat-spotted or seized roller. We swap out the worn set and check the hinges and bearings at the same time, which quiets the door down and takes strain off the opener. Rollers are inexpensive, so it’s worth replacing the whole set rather than chasing a single bad wheel.
Sensor Calibration
The safety sensors at the bottom of the door frame are a small pair of eyes that tell the opener to reverse if something crosses the beam. When they’re out of alignment, dirty, or wired loose, the door opens fine but refuses to close, or it closes a couple of feet and goes straight back up. We clean, realign, and test both sensors, then confirm the opener’s force and travel settings so the door reverses correctly when it should. If the opener itself is failing, that’s a separate job we also handle.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Repair
We work on the brand already in your garage, which matters more than people expect. Each manufacturer uses its own hardware, its own opener logic, and its own known wear points. Clopay doors and Amarr doors show up in a lot of Lynn homes, and we know their panel profiles well enough to tell you whether a damaged section can be replaced on its own or whether the whole door needs to come out. Wayne Dalton and Craftsman systems both turn up regularly too, and we know where each one tends to fail: a Wayne Dalton torsion setup wears differently than a Craftsman opener’s drive gears, and the fix follows from that.
On the opener side, we service LiftMaster, Chamberlain, and Genie units and understand how their travel limits, force settings, and safety reversals are meant to behave. That brand-specific knowledge is what keeps a repair precise instead of a guess and a return visit. Whether you have Clopay, Amarr, Wayne Dalton, Craftsmann or any other make, we can help. If you’re not sure what’s on your door, a photo of the label and the opener goes a long way.
Signs You Need Garage Door Repair Right Now
Some garage door symptoms are annoyances you can wait on. Others are signs to stop using the door until someone qualified looks at it. Here’s how to tell the difference.
- A loud bang from the garage and a door that won’t lift. That’s usually a broken spring, and the door is now far heavier than the opener is designed to pull. Stop using the opener, because it will strip its gears trying to lift a door that’s lost its counterbalance.
- The door goes up crooked or one side lags behind. A broken cable, a worn drum, or a roller that’s jumped the track can all cause this. Running the door while it’s off-level grinds the tracks and puts a twisting load on the panels.
- The door closes then immediately reverses. Nine times out of ten this is a sensor problem, not a door problem. It’s usually quick to fix, but it means the door isn’t securing the garage in the meantime, so it matters more at night.
- Grinding, scraping, or a rhythmic thump as the door moves. Worn rollers, a misaligned track, or a dry torsion shaft will all sound like this. Left alone, the noise turns into worn hinges and stretched hardware.
- The opener strains, hums, or stops partway. A straining opener is often a door that’s gotten heavy, not an opener that’s failed. Diagnosing both together saves you from replacing an opener that was doing its best with a poorly balanced door.
Our Garage Door Repair Process – Step by Step
Repairing a garage door is as much diagnosis as it is replacement. The steps below are what a typical Lynn call looks like from the time we arrive.
- 1
We listen and look. First we ask what the door is doing and when it started, then we run the door and watch and listen to it move. A lot of the time the sound tells us more than the symptom report does.
- 2
We test the balance and the safety systems. We disconnect the opener and lift the door by hand to check its counterbalance, then test the sensors, the force settings, and the auto-reverse. This tells us whether the problem sits in the door, the opener, or both.
- 3
We give you a written estimate before any work starts. That estimate covers the parts we expect to replace and the labor to do it. If we find something additional once we’re inside, you hear about it first and decide.
- 4
We make the repair with matched parts. Springs and cables are replaced in pairs because a fresh part paired with a worn one fails early. Fasteners, brackets, and drums get checked and tightened as we go.
- 5
We test the door and walk you through it. The door runs open to close several times, the safety reversal gets checked, and we show you what was replaced so you know what to listen for next time.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Lynn?
Garage door repair in Lynn typically runs $150 – $600, depending on what failed and whether the fix is a part or a whole system. Cable repair is usually $130 – $250, track realignment runs $120 – $240, and roller replacement sits at $110 – $220. Panel replacement is typically $250 – $500, and spring repair is $180 – $340 for one spring, with a matched pair running about twice that because both springs are normally replaced together. Opener repair is $120 – $320, separate from a new opener installation if that turns out to be needed.
What moves a price within those ranges: the door’s size and weight, how many parts failed at once, and whether the door has been neglected long enough that several worn components need to go at the same time. A single bad roller is a short job. A door that’s been running on a broken spring for weeks may need springs, cables, and a set of rollers. How to avoid overpaying is simple: get the estimate in writing before anything is touched, ask what’s being replaced and why, and don’t agree to a full door replacement for a problem that’s really a spring or a track.
Our estimates are free, and the price is quoted and agreed before any work starts, so the invoice matches the quote. What’s included is the diagnosis, the parts, the labor, and the testing at the end. Call (866) 570-7585 for a free estimate.
| Repair | Typical Estimated Range in Lynn |
|---|---|
| Roller replacement | $110 – $220 |
| Track realignment | $120 – $240 |
| Opener repair | $120 – $320 |
| Cable repair | $130 – $250 |
| Spring repair (one spring) | $180 – $340 |
| Spring repair (matched pair) | about twice the single-spring range |
| Panel replacement | $250 – $500 |
| Full garage door repair | $150 – $600 |
Garage Door Repair Near Lynn – Our Service Area
We cover Lynn and the towns around it: Saugus, Swampscott, Salem, Revere, Peabody, Nahant, Melrose, Wakefield, Lynnfield, Malden, and Chelsea. Doors in this area take a beating from cold winters and hot, humid summers, and a lot of the homes here have original doors and openers that are finally showing their age. Fast dispatch runs 7am to 7pm, Sunday through Friday. For repairs elsewhere on the North Shore, see our garage door repair page and the one for garage door repair in Swampscott. You can also read more about Lynn Garage Door Repair Co and our full range of work.
Serving Lynn, MA – Our Local Coverage Area
We serve Lynn and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Repair in Lynn
Garage door repair is the work of diagnosing and fixing a specific failed part of your door system, as opposed to replacing the whole door. That covers springs, cables, rollers, tracks, panels, sensors, and the opener itself. Because a garage door is a balanced mechanical system, one failed part often puts extra strain on the others, so a good repair involves checking the whole system, not just the part that broke.
Most repairs take between one and three hours once the technician is on site. A sensor realignment or a roller swap is quick, while a spring or cable replacement takes longer because the door has to be brought to a safe position and rebalanced afterward. If the door needs a panel that has to be matched and ordered, that adds a wait for the part, and we’ll tell you the timeline up front. Call (866) 570-7585 for an exact picture of your job.
Most garage door repairs in Lynn fall between $150 and $600, with the exact figure depending on what failed. Roller replacement is typically $110 – $220, cable repair $130 – $250, track realignment $120 – $240, and spring repair $180 – $340 for one spring. The first number you see is the estimate, and the price is quoted and agreed before any work starts, so there are no surprises on the invoice. Call (866) 570-7585 for a free estimate.
Yes. We service Clopay and Amarr doors along with LiftMaster, Chamberlain, Genie, Wayne Dalton, Craftsman, and Raynor equipment. Knowing each brand’s hardware and common failure points means we can often tell from the symptom alone which part is likely to blame. Whether your door is one of these makes or another brand entirely, we can help.
Same-day service is available for most repairs, because a door that won’t close can’t wait. We answer 24/7 on (866) 570-7585, and fast dispatch runs 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. We’re closed on Saturday.
The parts we install come with a manufacturer’s warranty, and our own workmanship is covered by a satisfaction guarantee. If something we replaced fails or the door doesn’t behave the way it should, call us and we’ll come back out to look at it. Ask the technician what the specific part warranty is on your repair so you have it in writing.
Clear the floor of the garage so the technician can move around the door safely, and move any vehicles out of the way. If the door is stuck open or won’t close, don’t force it; leave it in the position it’s in and let the technician handle it. Have a photo of the door and opener labels handy if you can, and note when the problem started. Call (866) 570-7585 to set a time.
Schedule Your Garage Door Repair Service in Lynn Today
If your door is stuck, noisy, or refusing to close, don’t wait for it to get worse. Call Lynn Garage Door Repair Co on (866) 570-7585 and we’ll book a technician who knows your brand. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the price is quoted and agreed before any work starts.
If you’re weighing a bigger job, our garage door repair service covers it, and we also handle opener repair, spring repair, and full installation.
Written by the team at Lynn Garage Door Repair Co.