Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Revere?
Garage door work in Revere typically runs $150 – $600 for a repair, and most jobs land in the lower half of that range. A single broken spring is usually $180 – $340, a cable repair $130 – $250, and a brand-new door installed $700 – $2200 depending on size, insulation and style. The written estimate you get before work starts sets the final price, and the estimate itself is free.
What drives the spread is rarely the town and almost always the job: which part failed, how many parts failed with it, and whether the door is a standard single-car panel or something wider and heavier. A torsion spring that snapped on a 16-foot double door is a different day than a roller set that wore flat on a 9-foot single. Call (866) 570-7585 for a free estimate, and we’ll tell you which side of that range your door falls on. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Garage Door Cost Breakdown (2026)
Here’s how garage door pricing breaks down for Revere homes. These are typical estimated ranges for the work itself, not a promise of an exact figure. Your written estimate is the number that counts.
| Service | Typical Estimated Range | What It Usually Covers |
|---|---|---|
| Garage door repair (general) | $150 – $600 | Diagnosis plus the fix for most single-part failures |
| Spring repair (one spring) | $180 – $340 | Replacing a single torsion or extension spring |
| Cable repair | $130 – $250 | Replacing a frayed or snapped lift cable, plus drums if needed |
| Opener repair | $120 – $320 | Fixing a motor, logic board, gear, sensor or remote issue |
| Opener installation | $250 – $550 | New opener hung, wired, and paired with remotes and safety sensors |
| Panel replacement | $250 – $500 | Swapping one damaged section of a sectional door |
| Track realignment | $120 – $240 | Straightening bent or knocked-out vertical and horizontal track |
| Roller replacement | $110 – $220 | Replacing worn rollers across the door |
| New door installation | $700 – $2200 | Door, hardware, springs, and installation of a standard residential door |
One thing worth knowing upfront: spring pricing is for one spring. Most doors carry a matched pair, and when one spring snaps the other has taken the same wear, so the pair is usually replaced together. A pair costs about twice a single spring. If a technician quotes you a single-spring price and both are worn, ask why – that’s the honest conversation to have before they start.
What pushes the number up: heavier doors, non-standard widths, insulation, windows, and the multi-part jobs (spring, cable and drum all failing together because a cable snapped first). What keeps it down: catching the problem early – a worn roller swapped at $110 – $220 is far cheaper than the panel damage a worn roller eventually causes.
What Affects Garage Door Pricing in Revere
Revere has a lot of older housing stock, and that shapes what we see. A door on a pre-war two-family that’s been repaired a dozen times behaves differently than a newer build with a factory-fresh door. Here’s what actually moves the price on a Revere job:
- Door age and history. A door that’s been shimmed, re-bent and propped up over the years often needs more than one part fixed on the same visit. That’s where a $150 repair turns into a $400 one.
- Single vs. double door. A 16-foot double door carries heavier springs and more hardware than a 9-foot single. Spring and cable work on a wider door sits higher in the range because there’s more to replace.
- Brand and model. LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor mechanisms differ in real ways. A tech who knows the specific brand diagnoses faster and orders the right part the first time. A tech guessing at it replaces parts by elimination and you pay for the misses.
- Whether it’s one part or a chain reaction. A snapped cable can bend the drum and knock the track out. Spring, cable and track as a package is more than any one of them alone.
- Spring type. Torsion springs (mounted on a bar above the door) and extension springs (running along the sides) price differently. Most modern doors use torsion, but plenty of Revere garages still have extension springs, and the two don’t share a bracket.
- Whether you repair or replace. If the door is sagging, the panels are dented, and the springs just went, a $700 – $2200 new installation can be the better long-term spend than patching a door that fails again in six months.
Revere’s mix of tight driveways and attached garages matters too. An attached garage means the door is part of the house’s weather envelope, so a panel that doesn’t seal lets cold air straight into a living space. That’s a reason to fix a bent bottom panel sooner rather than later.
How to Save on Garage Door
You don’t save money on a garage door by shopping the lowest bid. You save it by fixing the right thing once and not letting a cheap part take down an expensive one. A few practical moves:
- Get the whole system looked at, not just the broken part. When a spring snaps, the cables and drums have taken the same load. Catching a frayed cable at $130 – $250 beats waiting for it to snap and take the drum and track with it.
- Fix worn rollers early. Roller replacement is $110 – $220 and it’s the cheapest thing on the list. Worn rollers make the door jump and grind, and that vibration wears the opener and the track.
- Repair rather than replace while it still makes sense. A door with one dented panel and working hardware is a $250 – $500 panel job. Replacement only makes sense when the door is structurally tired or you’re changing the style anyway.
- Ask for a written estimate before work begins. We do this as standard. The written estimate is the price, and there’s no service-call or diagnostic fee stacked on top.
- Take the free estimate seriously as a diagnostic. Our technicians have up to 14 years of experience with these systems, and the estimate includes telling you what’s likely to fail next so you can plan. Call (866) 570-7585 and we’ll come look.
Garage doors are all we do, which means a technician who shows up knows the brand in your garage and isn’t learning it on your time. That focus is where the savings actually come from – fewer return visits, fewer wrong parts.
Is It Cheaper to Repair or Replace a Garage Door in Revere?
Repair is cheaper in most cases – a $150 – $600 repair beats a $700 – $2200 installation, and it’s the right call whenever the door structure and hardware are still sound. Replace when the door itself is the problem: sagging panels, rusted-through sections, a door that’s been re-bent so many times it won’t sit level, or a style you’re changing anyway. The dividing line is usually whether the panels are still solid. If they are, fix the springs, cables, rollers and opener and the door keeps working. If the panels are shot, you’re paying installation money on a door that will keep costing you.
Call (866) 570-7585 for an honest read on which side you’re on. Our free estimate tells you the repair price and the replacement price in the same visit so you can decide. Estimates are free.
Why Does Spring Replacement Cost What It Does?
Spring replacement runs $180 – $340 for one spring because it’s the most dangerous part of the door and the labor reflects that. A torsion spring under load can cause serious injury if it releases wrong, which is why we don’t hand out step-by-step instructions for doing it yourself and why you shouldn’t attempt it. What you’re paying for is a trained technician who winds and sets the spring to the correct tension for your door’s weight, using the right tools and following proper safety procedure. A single spring costs less than the pair, and a matched pair costs about twice a single spring. Call (866) 570-7585 for an exact quote. Estimates are free.
Can You Come Today for a Garage Door Repair in Revere?
Yes, same-day service is available. A door that won’t close, a spring that’s snapped, or a door stuck open is the kind of urgent call we treat as urgent, not routine. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you call outside those hours, we book you into the next opening. Same-day work is priced from the same ranges you see above – the written estimate sets the price, and the estimate is free. Call (866) 570-7585.
Do You Work on My Brand of Garage Door in Revere?
Very likely, yes. We work on the brand already in your garage, and we know eight of the most common residential brands installed across the area: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That covers the vast majority of doors and openers you’ll find in Revere homes. Brand-matched diagnosis matters because these mechanisms differ, and knowing the specific one saves guesswork. Clopay and Amarr familiarity helps on both repair and new-installation guidance when you’re choosing a door. From opener to spring to panel, one call covers it all. Call (866) 570-7585 and tell us the brand.
FAQs – Garage Door Cost
How much does a garage door repair cost in Revere?
Garage door repair in Revere typically costs $150 – $600, and most jobs land in the lower half of that range. The exact figure depends on which part failed and whether more than one part went with it. The written estimate sets the final price, and the estimate is free. Call (866) 570-7585 for an exact quote.
How much does a new garage door cost in Revere?
A new door installed runs $700 – $2200, depending on size, insulation and style. A standard single-car door sits at the low end; a double door with windows and insulation sits near the top. Installation includes the door, hardware and springs. Call (866) 570-7585 for a free estimate on your specific door.
Is a spring replacement for one spring or both?
$180 – $340 covers one spring. Most doors use a matched pair, and when one fails the other has the same wear, so the pair is usually replaced together and costs about twice that range. Your estimate will tell you which applies to your door. Call (866) 570-7585 for the exact figure. Estimates are free.
How much does it cost to fix a door that won’t close?
Usually $120 – $320, and the cause is most often the opener’s safety sensors, the logic board, or a track knocked out of alignment. A door that won’t close is an urgent call for us, so same-day service is available. Call (866) 570-7585. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Is it cheaper to repair or replace my garage door?
Repair is cheaper in most cases – $150 – $600 against $700 – $2200 for replacement. Replace only when the door’s panels are structurally shot or you’re changing the style. Call (866) 570-7585 for a free estimate that prices both options side by side so you can choose. Estimates are free.
Why Homeowners in Revere Call Us
We’re a garage door specialist, not a general contractor with a truck. Every visit is about one system: the door, the opener, the springs, the cables, the track. Our technicians have up to 14 years of experience, and the brands we know by heart – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, Raynor – cover nearly every Revere garage. Whether it’s a snapped spring, an opener that’s stopped responding, a dented panel, or a full new installation, it’s one company and one phone call for the whole system.
For full-service garage door repair and installation in Revere and the surrounding area, our parent company is Lynn Garage Door Repair Co, and we’re ready to take your call.
Call (866) 570-7585 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The written estimate sets the final price, and there’s no diagnostic fee tacked on.
Written by the team at Lynn Garage Door Repair Co.
Pricing reflects the Revere market as of 2026. Lynn Garage Door Repair Co offers free estimates – call (866) 570-7585.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Matt Sullivan"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Paige Walsh"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Dale Whitaker